10Base-5:-
Support Coaxial (RG-58A/U), use in Bus Topology, with 500m of Cable in length, with the speed of 10Mbps.
10base-2:-
Support Thin coaxial (RG-58A/U), use in Bus Topology, with 185m of Cable in length, with the speed of 10Mbps.
10Base-T:-
Support UTP (unshielded twisted pair of cat 3), use in star Topology, with 100m of Cable in length, with the speed of 10Mbps.
1Base-5:-
Support UTP (unshielded twisted pair of cat 3 and above all), use in Star Topology in which simple repeaters and hubs are used, with 100m of Cable in length, with the speed of 1Mbps.
10Broad-36:-
Support Coaxial (RG-58A/U, cat v), use in bus Topology, with 3600m of Cable in length, with the speed of 10Mbps.
10Base-FL:-
Support Fiber optic (Multimode 62.5.125 Fiber), use in Star Topology, with 2000m of full duplex Cable in length, with the speed of 10Mbps.
100Base-TX:-
Support UTP (Cat 5), use in Star Topology, with 100m of Cable in length, with the speed of 100Mbps.
100Base-FX:-
Support Fiber optic (Multimode 62.5/ 125 Fiber), use in Star Topology, with 412m (Half-Duplex) and 2000m (Full Duplex) of Cable in length, with the speed of 100Mbps in Half-Duplex and 200Mbps in Full-Duplex.
1000Base-SX:-
Support Fiber-optic (62.5/ 125 fiber), use in Star Topology, with 260m of Cable in length, with the speed of 1Gbps.
1000Base-LX:-
Support Fiber-optic (multimode 62.5/ 125 fiber) or mono mode fiber, use in Star Topology, with 440m (multimode) 5000m (single mode) of Cable in length, with the speed of 1Gbps.
1000Base-CX:-
Support Twinax, 150 ohm-balanced, shielded cable, use in Star Topology, with 25m of Cable in length, with the speed of 1Gbps.
1000Base-T:-
Support Cat 5, use in Star Topology, with 100m of Cable in length, with the speed of 1Gbps.
Note:-
1. 10 shows the speed of data which is travel in the media, 10 mean that the data will be transfer with the speed of 10 Megabits / Second (10Mbps)
2. Base is the short from of Baseband which signify the network’s type.
3. The segment length must be in digit, and segment type must be in letter form.
4. If a cable belongs to 10Base5 family, then the maximum cable length must not be exceeded from 500 meters.
5. Letters show that if a cable belongs to 10BaseT family then T means Twisted-Pair.
Support Coaxial (RG-58A/U), use in Bus Topology, with 500m of Cable in length, with the speed of 10Mbps.
10base-2:-
Support Thin coaxial (RG-58A/U), use in Bus Topology, with 185m of Cable in length, with the speed of 10Mbps.
10Base-T:-
Support UTP (unshielded twisted pair of cat 3), use in star Topology, with 100m of Cable in length, with the speed of 10Mbps.
1Base-5:-
Support UTP (unshielded twisted pair of cat 3 and above all), use in Star Topology in which simple repeaters and hubs are used, with 100m of Cable in length, with the speed of 1Mbps.
10Broad-36:-
Support Coaxial (RG-58A/U, cat v), use in bus Topology, with 3600m of Cable in length, with the speed of 10Mbps.
10Base-FL:-
Support Fiber optic (Multimode 62.5.125 Fiber), use in Star Topology, with 2000m of full duplex Cable in length, with the speed of 10Mbps.
100Base-TX:-
Support UTP (Cat 5), use in Star Topology, with 100m of Cable in length, with the speed of 100Mbps.
100Base-FX:-
Support Fiber optic (Multimode 62.5/ 125 Fiber), use in Star Topology, with 412m (Half-Duplex) and 2000m (Full Duplex) of Cable in length, with the speed of 100Mbps in Half-Duplex and 200Mbps in Full-Duplex.
1000Base-SX:-
Support Fiber-optic (62.5/ 125 fiber), use in Star Topology, with 260m of Cable in length, with the speed of 1Gbps.
1000Base-LX:-
Support Fiber-optic (multimode 62.5/ 125 fiber) or mono mode fiber, use in Star Topology, with 440m (multimode) 5000m (single mode) of Cable in length, with the speed of 1Gbps.
1000Base-CX:-
Support Twinax, 150 ohm-balanced, shielded cable, use in Star Topology, with 25m of Cable in length, with the speed of 1Gbps.
1000Base-T:-
Support Cat 5, use in Star Topology, with 100m of Cable in length, with the speed of 1Gbps.
Note:-
1. 10 shows the speed of data which is travel in the media, 10 mean that the data will be transfer with the speed of 10 Megabits / Second (10Mbps)
2. Base is the short from of Baseband which signify the network’s type.
3. The segment length must be in digit, and segment type must be in letter form.
4. If a cable belongs to 10Base5 family, then the maximum cable length must not be exceeded from 500 meters.
5. Letters show that if a cable belongs to 10BaseT family then T means Twisted-Pair.
